If the need for larger and more sophisticated grounding architectures were required. I 'd be inclined to just install 1/2" armored flex conduits at about 1.40/ft and blow multiple runs of TC into it. You'd still come in at under 2.00/foot and reduce the amount of cushions needed.

Sent on the go, from somewhere other than here.

-------- Original message --------

From: Bryan Fields <Bryan@bryanfields.net>

Date: 2019-09-02 13:00 (GMT-08:00)

To: psdr@hamwan.org

Subject: Re: [HamWAN PSDR] 1/2" Outdoor UV Protected CAT 5e

On 9/1/19 11:18 PM, Jamie Hughes wrote:
> Please see attached data sheet. And I got an email with pricing:
> Custom cuts are $10/ft but I can do a full 1000ft spool for $7500

I believe this was a nice way of telling you to "fuck off". :D

7.50/ft is insane, and it's not even got a water block in it. I've used a
belden product which was gel filled and armored/shielded for under a dollar
per foot.

Even 1 5/8" coax is 7/foot new, and it's got 4 oz of copper per foot in it.

73's
--
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net
_______________________________________________
PSDR mailing list
PSDR@hamwan.org
http://mail.hamwan.net/mailman/listinfo/psdr